Ormus Ocean Water Recipe

1 Two Pyrex bowls or stainless steel. 1 50cc syringe or a turkey baster. 1 PH paper which test up to at least 11. 1 Gallon of distilled water.

1 A white distilled vinegar. Pour four cups of water in a stainless steel and then you dissolve one cup of salt in the water. Strain salt water through coffee filters into the 2nd stainless steel. Using a ready pH paper, start adding droppers full of lye water to the salt water.

Test the pH of the water. The pH should just reach 10. It should not move as higher as 11. Use drops of vinegar to lower the pH in case it gets as higher as 11.

When the appropriate pH is achieved, test a number of areas in the water to ensure that it is equally distributed. Then pour water in a very large jar. Let it settle for about four hours. When four to twelve hours is over, drain off the salty water.

Then you refill the bottle with drinking water. Clean the precipitate not less than three times. Let it settle for about 4 hours then repeat again. After completing the final wash, you pour the slurry of water and white/grey powder into a jar which has a lid and keep it for use.

You should keep it away from magnetic or electric fields. ORMUS is always affected by energy fields. Also, it is affected by intent. Therefore, it seems to raise its potency whenever you surround it with energy objects.

In general, this is a simple ORMUS ocean water recipe. Use this ORMUS ocean water recipe always. Ormus Minerals Nutrition Formulas Ormus Minerals - Ormus Nectar Ormus Minerals - Ormus Earth Milk Ormus Minerals Ormus Elements Air - Water - Earth - Fire Ormus Minerals - Gold C-11 Infusion Ormus Minerals - Charged Ocean Energy Ormus Minerals - Complete Balance Ormus Minerals - Dead Sea Salt Dew Ormus Minerals - Gold Energy Ormus Minerals - Ocean Energy Ormus Minerals - Pure Dead Sea Salt Ormus Manna Ormus Minerals - Replenishing Ormus Minerals Ormus Minerals - New Beginnings Ormus Minerals - Health & Energy Ormus Infusion Ormus Minerals - Red Sea Salt Ormus Ormus Minerals - Holy Land Ormus Ormus Minerals - Gold Plus Ormus

Making Ormus at home is a rewarding practice that connects you with centuries of alchemical tradition. The wet method — raising the pH of a sea salt solution to exactly 10.78 using food-grade lye — remains the most accessible and reliable approach for home practitioners. Always use a calibrated pH meter, food-grade chemicals, and proper safety equipment including gloves and eye protection.

For best results, use premium unrefined sea salts such as Dead Sea salt or Celtic sea salt as your base material. Wash your precipitate thoroughly — at least 5-6 cycles — to remove residual alkaline compounds and bring the pH to a safe, neutral range before consuming. Store finished Ormus in sealed glass jars in the refrigerator, away from strong electromagnetic fields.

Consistency in preparation produces consistent results. Documenting your process — salt source, water quality, pH readings, settling times — allows you to refine your technique and improve each batch. Many experienced makers have developed highly refined processes over years of practice that produce exceptional quality Ormus.

Explore our full range of premium Ormus mineral supplements at OrmusMinerals.com.